VSS Electrosurgical Unit
VSS Electrosurgical Unit - Low Impedance High Frequency
Three Treatment Modes:
1) “CUT MODE” (cutting with least coagulation)
2) “CUT/COAG MODE” (cutting with balanced coagulation)
3) “COAG MODE” (full coagulation without cutting)
BI-POLAR CAPABILITIES
THREE YEAR WARRANTY
The handpiece can be used interchangeably for surgery and coagulation by switching electrodes. The basic unit includes a black surgical handpiece, a ground plate and cord, eight commonly used electrodes, and an electrode block. . .all autoclavable 15 minutes at 250° F.
THE VSS ELECTROSURGICAL UNIT IS READY AND CONSTANTLY ADJUSTS THE POWER THE SECOND IT IS TURNED ON
Soft tissue varies in electrical resistance. The deeper the tissue, the greater the electrical load it puts on the electrosurgical unit. The VSS Electrosurgical Unit features special low-impedance circuitry that acts like a car’s automatic transmission. Generally the power has to be set only once for the case at hand. Then the instrument’s circuitry takes over, automatically adjusting the power to compensate for tissue variations at the operative site. Therefore, cutting efficiency remains constant throughout the procedure…when the electrode penetrates into highly vascularized tissue in the middle of the incision.
The VSS ELECTROSURGICAL UNIT IS DESIGNED FOR TODAY’S ASEPSIS CONCERNS
The handpiece is activated by depressing the foot pedal assuring sterility throughout the operation. The Handpiece is made out of inert, high temperature Delrin resin that stands up to steam autoclaving for 15 minutes at 250 degrees F. The electrodes, ground plate and cord may be autoclaved.